ESD2430GRIP
Grip Seal ESD Shielding Bag - Large
610mm wide x 762mm long, 70 micron thickness
Large resealable metallised grip seal bag, designed to protect sensitive electronic components from electrostatic discharge (ESD). Boxed in 100's.
|
|
(Inc. VAT) |
(Ex. VAT) |
(Ex. VAT) |
|
100+
|
100 |
£182.55 |
£152.12 |
£1,521.20 |
|
500+
|
100 |
£178.56 |
£148.80 |
£1,488.00 |
|
1000+
|
100 |
£174.39 |
£145.32 |
£1,453.20 |
|
2500+
|
100 |
£172.10 |
£143.41 |
£1,434.10 |
Product features - large ESD grip seal bag
- Static-shielding bag with reusable grip seal.
- Protects sensitive electronic components from potential damage by static electricity.
- Comprehensively tested. ANSI/ESD S20.20 compliant. Exceeds industry standards ANSI/ESD S541, EIA 625.
- 3-layered bag: Inner: polythene; Middle: conductive metallised polyester; Outer: abrasion-resistant antistatic lacquer.
- Bag contents protected from an electrical charge by a 'Faraday cage' that sends the static charge around the metal bag, rather than through it.
- Protects valuable electronic components - e.g. printed circuit boards or mother boards - in transit or storage.
- Features printed standout yellow 'Electrostatic Sensitive Device' notice.
- Semi-transparent bag means you can easily identify contents.
- Bag surface resistance: 10^8 - 10^11 ohms/square (static-dissipative range).
Large grip seal ESD shielding bag - product dimensions
- Internal width: 610mm (24")
- Internal length: 762mm (30")
- Polythene thickness: 70 micron (280 gauge)
- 100 bags in a pack
See also: Dissipative pink antistatic grip seal bags
Are you looking for static-dissipative bags that are helpful for packing non-sensitive items such as screws or washers? If so, try our range of pink antistatic grip seal bags. These distinctive pink bags prevent tribocharging and are suitable for introducing to an ESD Protected Area (EPA).
See more sizes in this range
This product also appears in:
.jpg)
.jpg)
.jpg)
