0345 200 2828

Medium ESD grip seal bag features

• Resealable grip seal bag with static-shielding properties.
• Protects electronic components from ESD (electrostatic discharge) outside an EPA (Electrostatic Protected Area).
• Comprehensively tested to exceed ANSI/ESD S541, EIA 625 industry standards. ANSI/ESD S20.20 compliant.
• 3-layered bag: polythene inner layer, conductive metallised polyester middle layer, antistatic abrasion-resistant external lacquer.
• Creates a 'Faraday cage' that carries any electrical charge around the metal bag, rather than through it, therefore protecting its contents.
• Offers valuable protection to expensive electronic components such as printed circuit boards (PCBs) in transit or storage.
• Bag features printed ESD notice.
• Semi-transparent bag allows for the easy identification of contents.
• Bag surface resistance: 10^8 - 10^11 ohms per square.

Medium ESD grip seal bag sizes

• Internal width: 152mm (6")
• Internal length: 203mm (8")
• Polythene thickness: 70 micron (280 gauge)
• 100 bags per pack

See also: Pink dissipative antistatic grip seal bags

Are you packing non-static sensitive items (e.g. screws or washers)? If so, you may want to try our range of pink antistatic grip seal bags. These prevent tribocharging and are suitable for introducing to an ESD Protected Area (EPA).