0345 200 2828

How to replace the cutting tool (HSHDCUT)

For diagrams (fig 1-3) to support the following instructions, please see 3rd image, above.

1. Remove front cap in front of sealing bar as it opens (see figure 1A)
2. Loosen screws that hold handle and remove (fig 1B)
3. Detach screws that fasten sealing head (fig 2A)
4. Remove spreader from aluminium profiles (fig 2B)
5. Pull out old knife assembly and replace (fig 3A)
6. Reinstall sealing head by performing steps 1-5 in reverse order

Note: Always replace the front cap - the sealing machine will not operate without it.